two NOVAIR nitrogen generating system sizes

How to Size a Nitrogen Generator

Novair USAArticles, Knowledge Center, Nitrogen Generators

Three numbers are required to properly size a nitrogen generator: the purity your process requires, your peak flow rate, and the pressure needed at point of use. Sizing to peak demand ensures your nitrogen generator can handle all of your operations. When sized correctly, in-house nitrogen delivers a steady gas supply without fees for capacity that won’t be used.

Table of Contents

Why Sizing Goes Wrong

Most sizing issues come from guessing. A generator that is too small risks interrupting operations. One that is too large carries a higher upfront cost and doesn’t run as efficiently.

Nitrogen cylinders and bulk liquid nitrogen hide this problem, delivering more nitrogen when you run short. With in-house generation, the system produces exactly what your facility needs, without wasting nitrogen or running out. The sizing decision matters from day one to ensure your demand is met. It takes three inputs, most of which are already on your equipment spec sheets.

How to Size a Nitrogen Generator in 3 Steps

When you speak with a nitrogen expert, they’ll ask you for three major criteria:

  1. Nitrogen purity. Purity is the percentage of nitrogen in the output stream. Laser cutting, heat treating, and electronics work often call for high purity, while general purging or blanketing may not. In a PSA (pressure swing adsorption) system, higher purity typically means less nitrogen output from the same machine, so it’s important not to over- or underestimate this number. At NOVAIR, w can size up to 99.999%. Confirm the minimum with your equipment manufacturer, not with your current supplier.
  2. Peak flow rate. Flow rate is how much nitrogen is drawn per minute or hour, commonly measured in standard cubic feet per hour (SCFH) or per minute (SCFM), or in liters per minute (LPM). Record every machine or line that uses nitrogen and its flow while running, then add up those that run at the same time. This is your total peak demand. If your use comes in short bursts, a buffer tank can cover the spikes so the generator isn’t sized for them.
  3. Pressure needed at process. Find the pressure your equipment needs, then account for losses through piping, regulators, filters, and valves. The generator’s output pressure must exceed your use pressure to cover them. At NOVAIR, we typically produce clean, dry nitrogen at 80-125 psi. Please let us know if your process needs a different pressure.

A NOVAIR nitrogen expert will run these numbers with you to determine which nitrogen generating system is best for your facility. Speak with a US-based sales rep to start getting your generator sized today.

Meet Your Nitrogen Requirements Today, Plan for Tomorrow

Think about where your nitrogen use will be in three to five years. Adding a machine, line, or shift will alter that answer. A modular system like the NITROSWING lets you add capacity as demand grows without replacing a unit, so your initial investment can match today’s operation without limiting growth.

Not sure about on-site gas generation? Compare investing in a generator with the recurring costs of delivered gas in our article on the hidden costs of your liquid nitrogen bill.

Speak with an expert to start using in-house nitrogen.

FAQs

What size nitrogen generator do I need?

Sizing your nitrogen generator depends on your purity, flow rate, and pressure requirements. Size to your peak demand and add room for planned growth. A US-based NOVAIR representative can help size your generator based on your application requirements.

Does higher purity require a larger nitrogen generator?

Generally yes, assuming the same flow rate and operating conditions. In a PSA system, higher purity typically means less nitrogen output from the same machine. It’s important to consider all nitrogen requirements to correctly size your system to ensure the nitrogen output is sufficient for your application.

Which nitrogen generator is best for my business?

At NOVAIR, we offer a range of nitrogen generating systems. Each type of generator is best suited for different applications, and can be tailored to specific purities, flow rates, and pressures. Explore our nitrogen generators and speak with our nitrogen experts to determine which machine works best for you.

How much does a nitrogen generator cost?

NOVAIR nitrogen generators vary in cost depending on size and your facility’s nitrogen requirements. Please speak with a sales representative to obtain a personalized quote.


About NOVAIR USA

Headquartered in North Tonawanda, New York, NOVAIR USA, part of NOVAIR Groupe, is an industry leader in on-site nitrogen generators for industrial and healthcare applications. NOVAIR has been manufacturing air and gas systems worldwide since 1977. Our reliable, USA-made solutions are designed for safety and predictable operating costs. We also serve multiple healthcare and industrial sectors with our oxygen generators and medical gas equipment.

NOVAIR USA — On-Site Gas Generation Since 1977

NOVAIR business meeting